| NEW Adams Vibraphones
After many years of researching and experimenting, we proudly
present the new Adams vibraphone line up. Our engineers really did the impossible. They created
instruments for all purposes, with bars made out of a special aluminum alloy for high
quality sound. Adams introduces a new line up featuring 5 world class vibraphones.
Artist Vibraphone Classic:
AV1
New Concert Series:
CV1 - highly transportable!
CV1F and CV2F - with and without motor on an Endurance Field Frame
New Soloist Series:
SV1 - expanded 3.1 (E-F) range with motor
AV-1: Artist Vibraphone Classic, Traveller frame WITH motor
- Frame: Traveller
- Motor: 40-140 rmp with Silent Pause Control
- Range: 3 octave F3-F6
- Bars: Aluminum Graduated 57-38mm
- Pitch A: 442 Hz
- Length: 60”
- Low end: 35.6”
- High end: 22.4”
- Height adjustment: 33”-40.5”
NEW - CV-1: Concert Vibraphone, Voyager frame WITH motor (Easy/Light Transportability for the gigging percussionist)
- Frame: Voyager
- Motor: 40-140 rmp with Silent Pause Control
- Range: 3 octave F3-F6
- Bars: Aluminum Graduated 57-38mm
- Pitch A: 442 Hz
- Length: 60”
- Low end: 30”
- High end: 16”
- Height adjustment: 34”-41”
NEW - CV-1F: Concert Vibraphone, Field frame WITH motor
-
Frame: Endurance Field Frame
- Motor: 40-140 rmp with Silent Pause Control
- Range: 3 octave F3-F6
- Bars: Aluminum Graduated 57-38mm
- Pitch A: 442 Hz
- Length: 60 “
- Low end: 35.6 “
- High end: 22.4”
- Height adjustment: 35.2”-41.6”
- Weight: 132 lbs
Shown here with the 4VBBP01 Long Pedal Extension Accessory add on.
NEW - CV-2F: Concert Vibraphone, Field frame NO MOTOR
-
Frame: Endurance Field Frame
- NO Motor
- Range: 3 octave F3-F6
- Bars: Aluminum Graduated 57-38mm
- Pitch A: 442 Hz
- Length: 60”
- Low end: 35.6”
- High end: 22.4”
- Height adjustment: 35.2”-41.6”
- Weight: 132 lbs
 Shown here with the 4VBBP01 Long Pedal Extension Accessory add on.
NEW - SV-1: Soloist Vibraphone, Voyager frame WITH motor, 3.1 Octave E3-F6 (Easy/Light Transportability for the gigging percussionist with an expanded 3.1 octave range)
-
Frame: Voyager
- Motor: 40-140 rmp with Silent Pause Control
- Range: 3.1 octave E3-F6
- Bars: Aluminum Graduated 50-38mm
- Pitch A: 442 Hz
- Length: 62”
- Low end: 30”
- High end: 16”
- Height adjustment: 34”-41”
Concert Percussion
Warranty Information
Pearl‘s Marching and Concert Percussion except as
noted herein, purchased from an authorized Pearl dealer are warranted to the original
retail purchaser to be free from defects in material and workmanship at the time of
delivery. Warranty coverage will commence on the date of retail purchase and shall be
valid by item as indicated below and is not transferable. Shells: Wood shells are
guaranteed against material failure, ply separation or going out of round for a period of
three (3) years. Hardware: Hardware is guaranteed against defects in material and
workmanship for a period of three (3) years. Finish: Both the lacquer and covered finishes
on Pearl drums are guaranteed for one (1) year; however, Pearl does not guarantee against
deterioration by reason of corrosive atmosphere, extreme temperature, or other external
causes. Hoops: Wood hoops are guaranteed against material failure, ply separation or going
out of round for a period of one (1) year. Adams Products: All Adams Products are
guaranteed against defects in material and workmanship for a period of one (1) year from
the date of original purchase. Mallet bar sets are entitled to one (1) free tuning during
the period of one (1) year from the date of original purchase. Individual bars may be
exchanged as often as necessary during the period of one (1) year from the date of
original purchase. For rosewood and padouk bars, Pearl/Adams highly recommends waiting for
nine (9) months from the date of original purchase before exchanging or tuning the bars.
This warranty does not apply to alterations or additions to the product after it leaves
the factory. Warranty does not cover sticks, brushes, beaters, springs, heads or cymbals.
Pearl will repair and/or replace warranted parts free of charge upon delivery by the
original purchaser to an Authorized Dealer or to the Pearl Corporation. Proof of status as
original purchaser is required for warranty coverage. This warranty gives specific rights.
Purchaser’s rights may vary from state to state.
For complete details of
warranty information please contact your local authorized Pearl dealer, or Pearl
Corporation 549 Metroplex Drive, Nashville TN. 37211-3140
Telephone (615)-833-4477
|
