Pearl Hardware Accessories

Click here to watch a video clip about Pearl Hardware
Adapters    
AX-20
 The AX-20 features dual quick release clamps that accommodate tubes from 3/4" to 1 1/8" in diameter. Superior quality alloys and high-pressure molding assure years of dependable and trouble-free service. Click the adapter to see its application.		  
AX-25/AX-25L
 The AX-25/AX-25L feature rotating quick release jaws for virtually unlimited positioning possibilities. Both jaws adjust to accommodate tubing from 5/8" to 1 1/8". Click the adapter to see its application.		  
AX-28
 The AX-28 combines the 360-degree rotating clamp from the AX-25/25L with the fixed clamp of the AX-20.  Both clamps are quick release and adjust to fit tubing from 5/8" to 1 1/8".		  
AX-38
 The NEW AX-38 features three quick release clamps each adjustable to accommodate tubing from 3/8" to 1 1/4". Stop Lock compatible. Click the adapter to see its application.		  
Cymbal Holders    
CH-88L/88/80 
 Pearl offers cymbal holders for every application whether rack or adapter mounted. CH-88L and CH-88 cymbal holders feature Uni-Lock tilters with infinite angle capabilities. The CH-88L features a longer boom arm with counter weight for applications requiring extra reach. The CH-80 shares the feature of the CH-88 but with a gear tilter. 		 
CH-88L/88/80 
 Pearl offers cymbal holders for every application whether rack or adapter mounted. CH-88L and CH-88 cymbal holders feature Uni-Lock tilters with infinite angle capabilities. The CH-88L features a longer boom arm with counter weight for applications requiring extra reach. The CH-80 shares the feature of the CH-88 but with a gear tilter. 		 
CST-80
 The CST-80 Cymbal Stacker features our exclusive Dual Action Tilters that allow inline and offset mounting for virtually unlimited positioning and angling possibilities. The CST-80 features non-slip gear tilters and is compatible with C-800W, B-800W, BC-800W, C-70W, and B-70W stands and the CH-70 Cymbal Holder.		  
Tom Holders    
TH-100/100S/100I
 The TH-100 series tom holders feature Pearl's dual-action Uni-Lock system with full 180 degree up/down and 360 degree left/right motion for unparalleled tom positioning options and ease of use. The TH-100I and TH-100S both feature a 25mm shorter arm for use with suspension mounting systems.		  

TH-98/98S/98I
 The TH-98 series tom holders feature Pearl's infinitely adjustable Uni-Lock system for pin-point tom positioning. The TH-98I and TH-98S both feature a 25mm shorter arm for use with suspension mounting systems.

TH-88/88S/88I
 TH-88 Series tom holders share the same dimensions as the TH-98 series but feature gear tilters with 60 teeth.

 
Tom Brackets    

BT-3
 The BT-3 accepts all tom holders using 7/8" tubing and features an internal non-marring nylon sleeve for slip resistance. Stop-Lock receivers are built in.

BB-3
 The BB-3 accepts all holders and accessories using 7/8" tubing. The dual brackets feature slip resistant nylon sleeves and Stop-Lock receivers.

 

  
Cowbell Holders    

75X
 The 75X features a tilting post and 7/8" tube for use with drum racks and adapters.

75H
 The 75H hoop mounted cowbell holder features parallel action jaws for superior clamping power. The upper plate is contoured for a secure fit. The clamping surfaces are rubber lined to prevent slippage and protect the hoop from nicks and scratches.

  

NEW CA-100
 The NEW CA-100 hoop mounted cowbell holder features non-marring rubber jaws that rotate to fit the contour of the hoop for slip-proof clamping power regardless of bass drum size. The knurled "L" shaped rod fits all standard 3/8" brackets and is adjustable front/back and left/right for perfect placement. The "L" arm is held securely by a cowbell-style eyebolt clamp system.

  

PPS-15
 The PPS-15 allows cowbells and other percussive sounds to be played by foot thus freeing the hands to create complex rhythms not before possible

  

PPS-30
 The PPS-30 is a universal percussion mounting bracket that can be attached to stands ranging from 3/4" to 1-1/8" in diameter.

  

PPS-37
 The PPS-37 features a fully adjustable "L" arm for mounting cowbells, effects, and drums with 3/8" receivers. The gear tilter grips securely and permits infinite angling possibilities. The integrated quick release bracket facilitates fast set-up and removal.

  

PPS-31
 The PPS-31 features a pivoting cymbal arm for accurate cymbal positioning. The integrated mounting bracket fits tubing from 3/4" to 1 1/8".

PPS-51 & PPS-52
 The 2 post PPS-51 and 4 post PPS-52 percussion accessory racks feature universal-fit 3/8" posts with sure-grip eyebolt type on all popular diameter tubes, sure post gripping with eye-bolt wing assembly, and optional "Z" bars included for custom positioning.

 

  
Hi-Hat Accessories    

CLH-100
 The CLH-100 features a boom arm with stop-lock and Pearl's infinitely adjustable Uni-Lock tilter for ultra-precise positioning, versatility, and ease-of-use.

  

HA-100
 The NEW HA-100 allows the hi-hat to be placed next to the bass pedal on double bass set-ups for easy reach and fast pedal transitions. The HA-100 features non-marring rubber jaws that rotate to fit the contour of the hoop for slip-proof clamping power regardless of bass drum size. A cowbell-type eyebolt system holds the knurled Z-rod securely for set-and-forget dependability. Our newly designed round pivot bracket provides infinite adjustment possibilities for hi-hat placement exactly where you want. An AX-20 Multi-Clamp is included.

  

DCL-90
 The DCL-90 Drop Clutch closes the hi-hat cymbals without foot pressure thus allowing closed hats and double bass to be played simultaneously. Normal play is resumed by simply stepping on the footboard.

  

SGC-200P
 The SGC-200P Super Grip Clutch features a solid upper and lower tunnel design with a center griping hinge for super griping action and a die-cast wingnut designed for easy and secure tightening of the clutch.

  

CL98/98P
 The CL98P features minimal contact rubber washers for improved "chick-sound", clarity and increased volume. CL98 series hi-hat clutches feature felt washers. Both feature Pearl's Triple Lock system for non-slip dependability.

CL-68N
 Standard hi-hat clutch with die-cast wing bolt.

 

 
OptiMount I.S.S.    

The OptiMount attaches to  the tom's  tension rods and floats on rubber cushions, providing ultimate  stability while allowing the drum to resonate fully and freely. With OptiMount, the mounting hardware is completely removed from the drum shell providing a drastic improvement in resonance and sustain.

OPT-0708
 Fits virtually all drums 7" to 8" deep.
OPT-0910
 Fits virtually all drums 9" to 10" deep.
OPT-1112
 Fits virtually all drums 11" to 12" deep.

  

OPT-1314
 Fits virtually all drums 13" to 14" deep.
OPT-1516
 Fits virtually all drums 15" to 16" deep.

  

I.S.S.
 The Integrated Suspension System attaches the tom bracket to the rim of the drum thus permitting the shell vibrate freely for maximum sustain and resonance. The I.S.S. removes easily for quick drum head changes.

 

 

IS-0810N - Fits 8" to 10" 1.6mm steel hoops and original Super hoops.
IS-1216N - Fits 12" to 16" 1.6mm steel hoops.
IS-0810SL - Fits 8" to 10" 2.0mm steel /stainless steel hoops and 2.3mm Super Hoop II.
IS-1216SL - Fits 12" to 16" 2.0mm steel / stainless steel hoops and 2.3mm Super Hoop II.

GK-90
 The GK-90 masks the holes (inside and out) on drums where the BT-3 tom bracket has been removed.
Bass Drum Accessories    
JG-16
 The JG-16 Jungle Gig floor tom to bass drum conversion kit allows you to convert virtually any 16" floor tom into a bass drum. Simply attach an (optional) I.S.S. unit to your existing floor tom hoop, and clamp the JG-16's pedal bracket to the BT-3 bracket. Insert the included spurs (fits all floor tom leg brackets that accept 3/8" diameter legs) into the floor tom leg brackets, add toms and snare, and an instant Jungle-type drumset is created. There are no holes to drill or special hoops to buy. The JG-16 is easily removed to restore the floor tom to its original state.

PS-85
 The PS-85 attaches to the secondary pedal of most double pedals and adds stability and slip prevention.

 

B-200QB
 The Quad Beater (PAT. 5,610,351) features two plastic and two felt faces, each capable of a different sound.

  
B-100DB
 The Duo Beat two-way beater features two faces, plastic and felt , for added versatility. It's like getting two beaters for the price of one.		  
MasterCast Die Cast Hoops
    

Pearl MasterCast hoops are standard equipment on all Masters Series toms and floor toms. They significantly improve sound focus and provide an exciting explosive dynamic to the overall tone of each drum. MasterCast hoops also provide a smooth exclusive look and offer the ultimate in both strength, precision and tuning integrity.

Our OptiMount Suspension System mounts to the tom's tension rods and floats totally insulated on rubber cushions. It provides the ultimate in stability while allowing the drum to resonate fully unrestricted. With OptiMount, the mounting hardware is completely removed from the drum shell providing a drastic improvement in both resonance and sustain.
MasterCast hoops are available separately to fit most drum sizes. Pearl die cast hoops are priced affordably and are available in diameters from 8" to 18".

 

  
Snare Stand Accessories    

SBA-1
 The SBA-1 works with all Pearl snare stands to accommodate 12" snare drums such as the M-1270. Sold in sets of three.

  

TX-80
 The TX-80 Tube Extender extends the height of any cymbal arm, tom arm or stand that uses a 7/8" diameter pipe.

  
Accessory Packs    

PRK-1
 The PRK-1 Pro Repair Kit contains essential universal replacement parts for on-the-spot repairs at gigs and general drum maintenance. The PRK-1 includes the following: NP-69 plastic cymbal sleeves, FL-90 felt cymbal washers, M-8W wing nuts, SNC-40 snare cord and T-061 tension rods.

UGK-1
 The UGK-1 Upgrade Kit is designed to be a sound enhancing upgrade for ELX / EX and FX. It includes R-40 floor tom feet, B-200QB QuadBeater, NP-208 cymbal seat washer and NP-210 hi-hat clutch washers.